Hx35 HX Shredder 12 for stock replacement 94-02 dodge diesel

I can build these in two styles. 100% oem spec is a 56/60/12 rated to 360whp. This is a clone that has been gone through by hand along with the balance of the assembly tuned down to less then .005 grams inch in house. The oem allowed is .15 grams inch. The turbo comes with my standard 1 year and or 10,000 miles warranty. Perfect replacement for oem 94-02's and a nice upgrade for 91.5-93's. 89-91. I can change the outlet to a hose outlet at no cost difference. Or thd makes some nice adapters. I use the waste gate mounted to the turbine housing as it is smog legal due to the banks housing and it allows far easier re clocking of the turbo for different applications and compound turbo use. I will have two options below. Full oem for direct replacements and you are happy with how the factory turbo runs. Regardless of if it is one of the more affordable chargers like the shredder or the more performance oriented hero's and villain's, they all get the same attention to detail, comp cover locks, measured bearings and bores, file fit piston ring seals to ensure the owner has absolutely zero issues. Cast comp and the shredder turbine wheel to increase the whp capacity to 380 whp. And a billet comp with the shredder turbine for 410 whp capacity. The shredder turbine spools just a small bit slower but flows more exhaust gas while not hurting egt's and low end torque very much but let's the system breath better at the higher boost pressures. Pictured is the new boost controller which works phenomenal so all hx35 12's with a waste gate will come with them. If you have a tight space constraint i can instead use a all mechanical spring gate setup that fits inside a smaller area. Thank ya for looking and if you have any questions please feel free to call/text 209484227. I made a YouTube video under savage Fabrication going over this exact turbo.