Fully adjustable traction bar bracket kit. The front mounts are adjustable to change the drive force on the rear axle. The brackets can be bolts on or welded on. Cnc plasma cut from .250" mild steel with keyed joints to make assembly easier and over all strength higher. The rear brackets replace the factory lower axle bracket as well as have a built in shock mount. They fit Dana 70 axles but can be custom tailed to the axle you are running. These work for drag racing or sled pulling. Just change the length of the bar based on what you are going to be doing. If ordered unwelded the holes will be left un drilled for you to drill to your joints specs. If ordered welded please specify the hole side for your joints and I will drill them to size for you. These fit up to a 1.250" hiem with miss alignments or 2.625 wide joint. I personally use rough stuff specialties and ballistic fab joints depending on the application. Kit does not come with hiems tubing or hardware.
Please email me for the welded kit. It allows me to keep the shipping price low for the unwelded kit.